Steel sector
More than 40 years at your service
Pasek offers this service based on a thorough knowledge of refractory materials and the continued presence for over 40 years working within the facilities of our customers. In short we ensure that your system is always ready to produce.
The comprehensive maintenance may include refractory to management and purchase of various materials involved, and control of the material worn demolition and reconstruction of the layers of work and safety.
Finally the heating control and commissioning of all items.
PASEK 35 M (MORTERO 30 S)
Dry mortar with chemical setting based on micronized chamotte
Main applications:
Unions. (Security coating of steel casting ladles)
Application method:
Slip Casting
Maximum temperature service:
1500 ºC
Quality:
36% Al2O3 | 57% SiO2
PASEK 15 DN G (PRIMA DN)
Moderate performance concrete
Main application:
Protection of surfaces subjected to high temperature .
Application method:
Dry gunning
Maximum temperature service:
1100 ºC
Quality:
16,5% Al2O3
25,7% MgO
PASEK 45 P (SUPRA 250 T 0/2)
Main application:
Coke oven batteries; Ladle
Application method:
Plastering
Maximum temperature service:
1450 ºC
Quality:
42% Al2O3
44% SiO2
PASEK 45 G (SUPRA 250 T)
Gunitable concrete based on chamotte
Main application:
Air ducts. General protections.
Coating of pig iron route covers
Slag cones
Application method:
Gunited
Maximum temperature service:
1450 ºC
Quality:
42% Al2O3
44% SiO2
PASEK 55 C (HYDROCERAM 55 FT)
Tixotropic, Vibrated castable
Main application:
LADLE
COVER-BF
Application method:
Vibrated casting
Maximum temperature service:
1550 ºC
Quality
56% Al2O3
PASEK 65 AND C (PK 65 BCF)
Main application:
Permanent coating on Tundish
Application method:
Casting / Vibrated / Pneumatic transport
Maximum temperature service:
1650 ºC
Quality:
70% Al2O3
PASEK 65 AND G (HYDROCERAM 65 GUN C)
Main raw material: Andalusite
Main applications:
RH-OB , Injection lids, CAS, Steel casting ladle
Application method:
Gunited
Maximum temperature service:
1550 ºC
Quality:
68% Al2O3
PASEK 70 MGC P (SUPRA MGC 1505)
Based on magnesite and graphite
Main application:
Maintenance of slag lines in steel casting ladles
Application method:
Plastering / Dry gunning
Maximum temperature service:
1800 ºC
Quality:
70% MgO
PASEK 80 C (HYDROCERAM 80 FN)
Vibrating. Main raw material:Bauxite
Main applications:
Runner Cover; Reheating Furnace;Melting Furnace;Calciner;Boiler Cyclone;Rotary Kiln
Application method:
Vibrated casting
Maximum temperature service:
1650 ºC
Quality:
84% Al2O3
PASEK 80 G (HORMIGON V.T.)
Main raw material: Bauxite
Main application:
Torpedo ladle
Application method:
Dry gunning
Maximum temperature service:
1700 ºC
Quality:
80% Al2O3
PASEK 80 HR C (HYDROCERAM 80 HR)
High resistance concrete
Main applications:
Specific application in areas with demand for concrete with high compressive resistance : Ovens rolling , airports, etc.
Application method:
Vibrated casting
Cold crushing strength:
110 ºC : 1020 Kg/cm2
1000 ºC: 1950 Kg/cm2
Maximum temperature service:
1650 ºC
PASEK 85 G (SUPRA 85)
Plastic concrete based on high alumina, bauxite and corundum
Main application:
Maintenance of slag lines in steel casting ladles, RH-OB, etc.
Application method:
Dry gunning
Maximum temperature service:
1700 ºC
Quality:
89% Al2O3
PASEK 85 P (H 85 Plástica)
Plastic concrete based on high alumina, bauxite and corundum
Main applications:
Transition line protection in steel casting ladles
Application method:
Plastering
Maximum temperature service:
1700 ºC
Quality:
89% Al2O3
PASEK 85 S (PK 85 BP)
Plastic concrete based on high alumina, bauxite and corundum
Main applications:
Torpedo ladles
Application method:
Shotcrete
Maximum temperature service:
1700 ºC
Quality:
90% Al2O3
PASEK 90 F (PK ATN 8D)
Self-Flowing. Main raw material:Spinel
Main application:
Wall and bottom of steel casting ladle
Application method:
Poured
Maximum temperature service:
1750 ºC
Quality:
93% Al2O3
PASEK 90 03 F (PK ATN 9005)
Main application:
Reparación de fondos de cuchara
Application method:
Casting
Maximum temperature service:
1750 ºC
Quality:
91% Al2O3
PASEK 90 06 F (PK ATN 9008)
Main application:
Reinforcement of impact area on steel casting ladle
Application method:
Casting
Maximum temperature service:
1750 ºC
Quality
90% Al2O3
PASEK 95 C (HYDROCERAM 95)
Main raw material:Tabular alumina
Main application :
Snorkels RH-OB.
Application method:
Poured / Vibrated / Pneumatic transport
Maximum temperature service:
1700 ºC
Quality:
95% Al2O3
PASEK PISE (PISE SILICOALUMINOSO)
Main raw material: Silica
Main application:
Coating of slag cones. Steel Casting Ladles
Application method:
Dry gunning
Maximum temperature service:
1525 ºC
Quality:
89% SiO2
PASEK INSU 45 G (BIP 250 M)
Insulating concrete based on lightweight chamotte
Main application:
Insulating barrier coatings for tundish
Application method:
Dry gunning / Casting
Maximum temperature service:
1250 ºC
Quality:
40% Al2O3
PASEK THERMO 70 F (TERMOCAST 70 E)
Basic Mix. Hot-Flowing. Main raw material:Tabular alumina
Main applications:
Hot repairs in steel casting ladles.
Application method:
Dry Casting
Maximum temperature service:
1700 ºC
Quality:
76% Al2O3
PASEK PISE SG (PISE SG)
Main application:
Slag Cones
Application Method:
Dry Gunning
Maximum temperature service:
1525 ºC
Quality:
90% SiO2
PASELITE 60
Basic Mix
Main applications:
Tundish
Application method:
Wet gunning
Quality:
62% MgO
PASEK THERMO 80 F (TERMOCAST 80)
Hot-Flowing
Main application:
Hot repairs in steel casting ladles.
Application method:
Dry casting
Maximum temperature service:
1650 ºC
Quality:
79% Al2O3
Pasek PISE
Masa básica gunitable formulada con magnesita y dunita de alto rendimiento.
Principal Aplicación:
Revestimiento de trabajo de artesas de colada continua.
Método de aplicación:
Gunitado en húmedo
Temperatura máxima servicio:
1750 ºC
Calidad:
70% MgO
PASELITE 75 (PASELITE 75W)
Main applications:
Tundish
Application method:
Wet spraying
Maximum temperature service:
1750 ºC
Quality:
70% MgO